Data and file management
R&S
®
RTE
507User Manual 1326.1032.02 ─ 20
3. Select the file format: png, jpg, or another one.
4. To change the directory, tap "Save As" and configure the path.
The symbols of often used target folders are listed on the left of the file explorer. By
default, screenshots are saved in the
C:\Users\Public\Public Documents\Rohde-Schwarz\RTx\
ScreenShots directory.
5. Tap "Save".
The file is saved and the dialog box closes.
6. Check if the screenshot is saved to the desired directory.
7. To save further screenshots, use one of the following ways:
● Configure the [PRINT] key. Press the key to save a screenshot.
See also Chapter 4.3, "Frontpanel setup", on page 139.
● Add the "Save Screenshot" icon to the toolbar. Tap the icon to save an image.
See also Chapter 3.4.7.2, "Configuring the toolbar", on page 119.
● Tap "Save" in the "Screenshot" dialog box to save the image to the specified
file.
● To save the image with a dedicated filename or to another directory, tap "Save
As" in the "Screenshot" dialog box. Select the path, enter a filename, and tap
"Save".
Printing on a black-and-white printer
●
If you use the "White background" or "Inverse color" settings and save the image to
a file, you get a grayscaled picture. The contrast of the resulting gray lines on the
printout depends on waveform colors and the used printer.
●
To get a monochrome image, set the "Color = Black and white" and tap "Print" to
start the direct printout or the print to file. See also "Printer" on page 503.
12.5 Reports
Reports document the current measurement and test results. The report contains gen-
eral information, current vertical and horizontal settings, trigger settings, active chan-
nels and all current results except for zoom and search results. A screenshot is also
included.
The report is configured in the "Report" tab, the screenshot is configured in the
"Screenshot" tab.
You can create the report manually, or automatically on defined events:
●
Press the [PRINT] key.
Before, configure the key to create or print reports, see Chapter 4.3, "Frontpanel
setup", on page 139
●
Tap the "Create report" toolbar icon.
Reports
To Next Page
Loading...
