Preface
R&S
®
RTE
51User Manual 1326.1032.02 ─ 20
Type Designation Order No. for
1326.2000.xx /
1317.2500.xx instru-
ments
R&S RTE-K10 SENT serial triggering and decoding 1326.1603.02 /
1326.1532.02
R&S RTE-K18 Spectrum Analysis 1326.3006.02 /
1326.3035.02
R&S RTE-K31 Power analysis 1326.1278.02 /
1317.7177.02
R&S RTE-K35 Bus analysis for I2C, SPI, RS232/UART, CAN, CAN-FD,
LIN, SENT, 100BASE-Tx and 100BASE-T1. Requires cor-
responding protocol decoding option.
1801.2852.02
R&S RTE-K50 Custom Manchester and NRZ serial triggering and decod-
ing
1326.1326.02 /
1326.1310.02
R&S RTE-K55 MDIO serial triggering and decoding 1326.1255.02 /
1326.0720.02
R&S RTE-57 100BASE-T1 serial triggering and decoding 1333.0615.02
R&S RTE-K60 USB 1.0/1.1/2.0/HSIC serial triggering and decoding 1326.1626.02 /
1326.1610.02
R&S RTE-K63 USB-PD serial triggering and decoding 1326.3158.02 /
1326.3141.02
R&S RTE-K65 SpaceWire serial triggering and decoding 1326.2845.02 /
1326.2839.02
R&S RTE-K76 CXPI serial triggering and decoding 1326.3193.02 /
1326.3187.02
2.4 Conventions used in the documentation
2.4.1 Typographical conventions
The following text markers are used throughout this documentation:
Convention Description
"Graphical user interface ele-
ments"
All names of graphical user interface elements on the screen, such as
dialog boxes, menus, options, buttons, and softkeys are enclosed by
quotation marks.
[Keys] Key and knob names are enclosed by square brackets.
Filenames, commands,
program code
Filenames, commands, coding samples and screen output are distin-
guished by their font.
Input Input to be entered by the user is displayed in italics.
Conventions used in the documentation
To Next Page
Loading...
