Rohde & Schwarz RTE Series - Page 668

Protocol analysis
R&S
®
RTE
668User Manual 1326.1032.02 ─ 20
Remote command:
TRIGger<m>:MILStd:CMD:CCONdition on page 1612
TRIGger<m>:MILStd:CMD:CMAX on page 1612
TRIGger<m>:MILStd:CMD:CMIN on page 1612
T/R (Transmit/receive)
Toggles the data direction of the selected command: 1 (transmit), 0 (receive), or X
(either).
Remote command:
TRIGger<m>:MILStd:CMD:TR on page 1613
Status Flags
Specifies the values of the status flags. You can use the following characters: 1; 0; or X
(do not care).
For details, see "Status Word" on page 660.
Remote command:
TRIGger<m>:MILStd:STATus:BCReceived on page 1617
TRIGger<m>:MILStd:STATus:BUSY on page 1618
TRIGger<m>:MILStd:STATus:DBCaccept on page 1618
TRIGger<m>:MILStd:STATus:INSTrument on page 1618
TRIGger<m>:MILStd:STATus:MERRor on page 1618
TRIGger<m>:MILStd:STATus:SREQuest on page 1618
TRIGger<m>:MILStd:STATus:SUBSystem on page 1619
TRIGger<m>:MILStd:STATus:TERMinal on page 1619
Error Condition
Specify the error conditions to be triggered on.
MIL-1553 (option R&S RTE-K6)