Protocol analysis
R&S
®
RTE
687User Manual 1326.1032.02 ─ 20
Figure 13-50: Decoded ARINC 429 signal with applied label list and results table. The second and
eight frames contain errors.
Table 13-11: Content of the "Decode results" table
Column Description
State Overall state of the frame.
Start Time of word start in relation to the trigger point
Stop Time of word stop in relation to the trigger point
Label The value of the label bytes
SDI The state of the SDI bits
DATA All 32 bits of the word.
SSM The state of the SSM bits
Label Name The label name
Data The value of the data bytes
Data format
You can select various data formats for the values displayed in the decode table and in
the combs of the decoded signal.
Remote command:
●
BUS<m>:FORMat on page 1422
ARINC 429 (option R&S
RTE-K7)
To Next Page
Loading...
