Rohde & Schwarz RTE Series - Page 794

Protocol analysis
R&S
®
RTE
794User Manual 1326.1032.02 ─ 20
Frame type
Selects the frame type for the custom bus filtering.
You can define individual checking parameters for the fields listed in the "Trigger type
dependent settings".
To specify these parameters, select a field from this list and define the data and/or
index operators and values, or the bit state.
Remote command:
BUS<m>:CMSB:FILTer:FRAMe<n>:ENABle on page 1757
Error types: Item name, Enable
The table lists the error types you can filter on. Select the required errors in the
"Enable" column. Available are "CRC" error and "Parity" error.
Remote command:
BUS<m>:CMSB:FILTer:ERRor<n>:ENABle on page 1756
Field name / Condition / Enable
This table lists the field numbers and names in the selected frame together with a sum-
mary of the user settings of checking conditions for each field and a checkbox to
enable the checking.
Select a field in the table to specify the checking conditions for this field in the "Data",
"BitState" and/or "Index" dialog (whichever applies). The condition is only applied, and
the "Condition" is only shown in the table, if "Enable" is checked.
Remote command:
BUS<m>:CMSB:FILTer:FIENable on page 1756
Bit State
Defines the bit state to be checked for the selected field. Permitted bit states are "1",
"0" or "X" (do not care).
Remote command:
BUS<m>:CMSB:FILTer:BIT on page 1754
Data
Defines for the selected field, how a data check is executed.
"Condition"
Defining specific data or a data range requires to set the operator to
one of the following conditions: equal, not equal, less than, less than
or equal, greater than, greater than or equal, in range, out of range.
"Min"
Specifies data or sets the start value of a data range.
"Max"
Sets the end value of a data range, if "Condition" is set to "In range"
or "Out of range".
Remote command:
BUS<m>:CMSB:FILTer:DMAX on page 1755
BUS<m>:CMSB:FILTer:DMIN on page 1755
BUS<m>:CMSB:FILTer:DOPerator on page 1755
Index
Defines for the selected field, how an index check is executed.
Custom: Manchester / NRZ (option R&S
RTE-K50)M