Rohde & Schwarz RTE Series - General Settings

Waveform generator (Option R&S RTE-B6)
R&S
®
RTE
931User Manual 1326.1032.02 ─ 20
15.1.3.1 General settings
Consists of settings for selecting the modulation type.
Modulation type
Selects the modulation type, which defines how the carrier signal is modified.
"AM"
Amplitude modulation.
See: Chapter 15.1.3.2, "AM modulation", on page 932.
"FM"
Frequency modulation.
See: Chapter 15.1.3.4, "FM modulation", on page 934.
"PWM"
Pulse width modulation
See: Chapter 15.1.3.3, "PWM modulation", on page 933
"FSK"
Frequency shift keying (FSK) modulation.
See:Chapter 15.1.3.5, "FSK modulation", on page 935.
Remote command:
WGENerator<m>:MODulation:TYPE on page 1926
Carrier frequency
Sets the frequency of the carrier signal.
Remote command:
WGENerator<m>:MODulation:CARRier:FREQuency on page 1927
Carrier period
Sets the period of the carrier signal.
Setup of the waveform generator