Instrument Tour
R&S
®
RTE
22Getting Started 1326.1026.02 ─ 08
4.1.2 Other Front Panel Connectors
Besides the input connectors, the instrument has USB connectors and probe
compensation connectors at the front panel.
[USB]
T
wo USB type A connectors that comply with standard USB 2.0. They are used to
connect devices like keyboard, mouse, printer and USB flash drive.
Note: Electromagnetic interference (EMI) can affect the measurement results. To
avoid any impact, do not use USB connecting cables exceeding 1 m.
PROBE COMPENSATION
Probe compensation terminal to support adjustment of passive probes to the
oscilloscope channel.
Protective earth conductor for grounding the instrument.
Square wave signal for probe compensation, 1 kHz and 1 V
pp
.
Ground connector for probes.
4.2 Rear Panel
Figure 4-2 shows the rear panel of the R&S RTE with its connectors.
Rear Panel
To Next Page
Loading...
