Rohde & Schwarz RTE - Page 1234

Remote control commands
R&S
®
RTE
1234User Manual 1326.1032.02 ─ 20
CHANnel<m>[:WAVeform<n>]:HISTory:REPLay <AutoRepeat>
If ON, the replay of the history waveform sequence repeats automatically. Otherwise,
the replay stops at the stop index set with CHANnel<m>[:WAVeform<n>]:HISTory:
STOP.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
[:WAVeform<n>] is irrelevant, omit it.
Parameters:
<AutoRepeat> ON | OFF
*RST: OFF
Usage: Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?
Returns the date of the current acquisition that is shown in the history viewer
(CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
[:WAVeform<n>] is irrelevant, omit it.
Return values:
<DateAbsString> String with date of the current acquisition (absolute time)
Usage: Query only
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSABsolute?
Returns the abolsute daytime of the current acquisition that is shown in the history
viewer (CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
[:WAVeform<n>] is irrelevant, omit it.
Return values:
<TimeAbsString> String containing the time and unit
Usage: Query only
Asynchronous command
Waveform analysis