Getting started
R&S
®
RTE
129User Manual 1326.1032.02 ─ 20
● To get the value that was used before the keypad was displayed, tap "Cur".
● To enter a user-defined value, tap the numbers and complete the entry by tap-
ping the unit button.
– The arrow buttons move the cursor left or right.
– "Bksp" deletes the last character before the cursor.
– "±" changes the sign of the value.
To enter data with the on-screen keyboard
1. Double-tap the entry field to open the on-screen keyboard.
If available, you can also tap the keyboard icon on the right of the entry field.
2. Enter the text as you would on a normal keyboard.
● To enter a series of capital characters, tap "Caps".
To enter one capital character, tap "Shift".
● To use the currently defined value, tap "Cur". This is the value that was used
before the keyboard was displayed.
● The arrow buttons move the cursor left or right.
● "Bksp" deletes the last character before the cursor.
3. Tap "Enter" to complete the entry.
To enter numeric data in a dialog box with navigation controls
1. To navigate to the entry field, press the [⇤ Field] and [⇥ Field] keys.
2. To change the value with a small step size, turn the rotary knob.
Alternatively, press the [⇧] and [⇩] keys for a larger step size.
If you edit numeric data in tables, the entry field must be in edit mode. To activate the
edit mode, press ENTER, or the [☑] key, or the navigation rotary knob.
Operating the instrument
To Next Page
Loading...
