Rohde & Schwarz RTE - Page 1318

Remote control commands
R&S
®
RTE
1318User Manual 1326.1032.02 ─ 20
Parameters:
<FreqSpan> Frequency span
Range: 1 to 4E+12
Increment: 1
*RST: 5E+9
Default unit: Hz
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:ADJusted?
Queries the effective resolution bandwidth.
Suffix:
<m>
.
1..8
Math waveform
Return values:
<AdjResBW> effective resolution bandwidth
Range: 0.01 to 2E+12
*RST: 0
Default unit: Hz
Usage: Query only
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:AUTO <State>
Couples the frequency span to the RBW.
Suffix:
<m>
.
1..8
math waveform
Parameters:
<State> ON | OFF
*RST: ON
Usage: Asynchronous command
CALCulate:MATH<m>:FFT:BANDwidth[:RESolution]:RATio <SpanRBWRatio>
This command defines the ratio of span (Hz) / resolution bandwidth (Hz).
Suffix:
<m>
.
1..8
math waveform
Parameters:
<SpanRBWRatio> ratio span / resolution bandwidth
Range: 1 to 1000
Increment: 1
*RST: 100
Spectrum analysis