Rohde & Schwarz RTE - Page 1825

Remote control commands
R&S
®
RTE
1825User Manual 1326.1032.02 ─ 20
Parameters:
<FrameNoCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WPAY <SearchName>,<PayloadCheck>
SEARch:TRIGger:USB:WPAY? <SearchName>
Defines, whether a search for any payload data shall be activated or not.
Parameters:
<PayloadCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WPID <SearchName>,<WithPIDCheck>
SEARch:TRIGger:USB:WPID? <SearchName>
Defines, whether a search for any packet ID error shall be activated or not.
Parameters:
<WithPIDCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WPOR <SearchName>,<WithPortCheck>
SEARch:TRIGger:USB:WPOR? <SearchName>
Defines, whether a search for any port shall be activated or not.
Parameters:
<WithPortCheck> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:USB:WSEU <SearchName>,<WithSEUCheck>
SEARch:TRIGger:USB:WSEU? <SearchName>
Defines, whether a search for any SEU shall be activated or not.
For SEU, see "SEU" on page 834.
Protocols