Rohde & Schwarz RTE - Page 1836

Remote control commands
R&S
®
RTE
1836User Manual 1326.1032.02 ─ 20
TRIGger<m>:USBPd:FRENable <Frame>, <Enabler>
TRIGger<m>:USBPd:FRAMe<n>:ENABle <Enable>
Enables or disables the checking condition for the selected frame.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
<n> *
Specifies the frame number.
Parameters:
<Enable> ON | OFF
*RST: OFF
Example:
TRIGger:USBPd:FRAMe1:ENABle ON
Enables searching for for the Test frame.
TRIGger:USBPd:FRENable "Control Frame" ON
Enables searching for the Control frame.
TRIGger<m>:USBPd:FIENable <Frame>, <Field>, <Enabler>
TRIGger<m>:USBPd:FRAMe<n>:FLD<o>:ENABle <CondEnabler>
Enables or disables the checking condition for a specific data pattern in the selected
field of the selected frame.
Suffix:
<m>
.
1..3
Only 1 = A-trigger, 2 | 3 = not available. Can be omitted.
<n> *
Specifies the frame.
<o> *
Specifies the field number within the frame.
Parameters:
<CondEnabler> ON | OFF
ON
Checking condition enabled
OFF
Checking condition disabled
*RST: OFF
Example:
TRIGger:USBPd:FRAMe3:FLD1:ENABle ON
Enables the checking condition for the Extended field of the
Control frame.
TRIGger:USBPd:FRENable "Data Frame", "Data
Role" ON
Enables the checking condition for the Data Role field of the
Data frame.
Protocols