Protocol analysis
R&S
®
RTE
582User Manual 1326.1032.02 ─ 20
Figure 13-22: Decoded CAN FD signal with data type = CAN_L, arbitration rate = 1 Mbps and data rate
= 2 Mbps
You can also load and apply industry-standard DBC files. The symbolic names from
the file are applied to the display of the decoded data, see Chapter 13.5.7.2, "Symbolic
decode waveform", on page 595.
Figure 13-23: Decoded CAN signal with applied DBC file and "Symbolic" data in the result table
CAN and CAN FD (option R&S RTE-K3/K9)
To Next Page
Loading...
