EasyManua.ls Logo

Rohde & Schwarz RTE - Page 674

Rohde & Schwarz RTE
2078 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Protocol analysis
R&S
®
RTE
674User Manual 1326.1032.02 ─ 20
Type
The search criterion is defined by "Type". All trigger types are also available for search.
Additional search parameters are provided under "Detailed Search Parameter Setup".
"Sync"
Searches for a sync impulse.
"Word"
Searches for the selected word type.
"Data Word"
Searches for the specified data word. Additional search parameters:
remote terminal address, data pattern and data index.
"Command /
Status Word"
Searches for command or status words. Additional search parame-
ters: remote terminal address, and 11-bit information.
"Command
Word"
Searches for a command word. Additional search parameters: remote
terminal address, subaddress / mode, and data word count / mode
code.
"Status Word"
Searches for a status word. Additional search parameters: remote
terminal address, and status flags.
"Error condition"
Identifies various errors in the frame, see "Error Condition"
on page 668.
Remote command:
SEARch:TRIGger:MILStd:TYPE on page 1624
Sync Type / Word Type
Searches for a sync impulse/ word type. You can search for "Command/Status", "All"
or "Data" sync pulses/ word types.
Remote command:
SEARch:TRIGger:MILStd:TPSPecifier on page 1629
Remote terminal address setup: Condition, RTA
The remote terminal address setup consists of the condition and one or two RTA pat-
terns.
The RTA setup settings are the same as in the MIL trigger setup, see "Remote Termi-
nal Address" on page 664.
Remote command:
SEARch:TRIGger:MILStd:CDST:RCONdition on page 1624
SEARch:TRIGger:MILStd:CMD:RCONdition on page 1624
SEARch:TRIGger:MILStd:DATA:RCONdition on page 1624
SEARch:TRIGger:MILStd:CDST:RMIN on page 1625
SEARch:TRIGger:MILStd:CMD:RMIN on page 1625
SEARch:TRIGger:MILStd:DATA:RMIN on page 1625
SEARch:TRIGger:MILStd:CDST:RMAX on page 1625
SEARch:TRIGger:MILStd:CMD:RMAX on page 1625
SEARch:TRIGger:MILStd:DATA:RMAX on page 1625
Data pattern setup: Condition, Data min, Data max
The data pattern setup consists of the condition and one or two data patterns.
MIL-1553 (option R&S
RTE-K6)

Table of Contents

Other manuals for Rohde & Schwarz RTE

Related product manuals