Rohde & Schwarz RTE1022 - Page 1452

Remote control commands
R&S
®
RTE
1452User Manual 1326.1032.02 ─ 20
SEARch:RESult:I2C:FRAMe<m>:BYTE<n>:COMPlete?.................................................. 1457
SEARch:RESult:I2C:FRAMe<m>:BYTE<n>:STARt?........................................................1457
SEARch:RESult:I2C:FRAMe<m>:BYTE<n>:VALue?........................................................1457
SEARch:RESult:I2C:FCOunt? <SearchName>
Query parameters:
<SearchName>
Return values:
<Count> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:I2C:FRAMe<m>:STATus? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<State> INComplete | OK | UNEXpstop | INSufficient | ADDifferent
*RST: OK
Usage: Query only
SEARch:RESult:I2C:FRAMe<m>:STARt? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:I2C:FRAMe<m>:STOP? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Protocols