Rohde & Schwarz RTE1104 - Page 1553

Remote control commands
R&S
®
RTE
1553User Manual 1326.1032.02 ─ 20
SEARch:RESult:LIN:FRAMe<m>:VERSion?...................................................................1557
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:STATe?........................................................1557
SEARch:RESult:LIN:FRAMe<m>:BYTE<n>:VALue?........................................................1557
SEARch:RESult:LIN:FCOunt? <SearchName>
Query parameters:
<SearchName>
Return values:
<Count> Range: 0 to 100000
Increment: 1
*RST: 0
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:STATus? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<State> OK | UART | CHCKsum | VERS | LENer | SPERror | PRERror |
SYERror | WAKeup | CPERror | INSufficient | INComplete
*RST: OK
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:STARt? <SearchName>
Suffix:
<m>
.
*
Query parameters:
<SearchName>
Return values:
<Start> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
SEARch:RESult:LIN:FRAMe<m>:STOP? <SearchName>
Suffix:
<m>
.
*
Protocols