Rohde & Schwarz RTE1104 - Page 1893

Remote control commands
R&S
®
RTE
1893User Manual 1326.1032.02 ─ 20
Parameters:
<DLCMin>
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CXPI:ERRor:CRC <SearchName>,<ErrorCRC>
SEARch:TRIGger:CXPI:ERRor:CRC? <SearchName>
Searches for a cyclic redundancy check error, if SEARch:TRIGger:CXPI:TYPE is set
to ERRor.
Parameters:
<ErrorCRC> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CXPI:ERRor:DLC
<SearchName>,<ErrorDLC>
SEARch:TRIGger:CXPI:ERRor:DLC? <SearchName>
Searches for a data length code error, if SEARch:TRIGger:CXPI:TYPE is set to
ERRor.
Parameters:
<ErrorDLC> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CXPI:ERRor:IBS <SearchName>,<ErrorIBS>
SEARch:TRIGger:CXPI:ERRor:IBS? <SearchName>
Searches for an inter-byte-space error, if SEARch:TRIGger:CXPI:TYPE is set to
ERRor.
Parameters:
<ErrorIBS> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CXPI:ERRor:IFS <SearchName>,<ErrorIFS>
SEARch:TRIGger:CXPI:ERRor:IFS? <SearchName>
Searches for an inter-frame-space error, if SEARch:TRIGger:CXPI:TYPE is set to
ERRor.
Protocols