Protocol analysis
R&S
®
RTE
577User Manual 1326.1032.02 ─ 20
Figure 13-19: Trigger setup to trigger on data byte with value = 17 at 11th data byte location
The instrument skips the first 3 data bytes and starts comparing the data pattern with
the 4th data byte. So, the byte with value 17 can be found between the 11th and the
19th data byte.
Figure 13-20: Data type trigger on data byte with value = 17 at 11th data byte location
CAN and CAN FD (option R&S RTE-K3/K9)
To Next Page
Loading...
