Rohde & Schwarz RTE1104 - Page 843

Protocol analysis
R&S
®
RTE
843User Manual 1326.1032.02 ─ 20
You can refine the search condition:
●
See "Address check" on page 844
●
See "End Point check" on page 844
Remote command:
SEARch:TRIGger:USB:SPEC on page 1821
Error condition
Searches for the following error conditions:
"PID Error"
Searches for packet identifier errors.
Remote command:
SEARch:TRIGger:USB:PIDerror on page 1819
"CRC5 Error"
Searches for any CRC5 error event.
Remote command:
SEARch:TRIGger:USB:CRC5error on page 1814
"CRC16 Error"
Searches for any CRC16 error event.
Remote command:
SEARch:TRIGger:USB:CRC16error on page 1814
"Bitstuff Error"
Searches for bitstuff errors, thus an erroneous or missing bit stuffing
sequence (see USB standard).
Remote command:
SEARch:TRIGger:USB:BITSterror on page 1813
USB (option R&S
RTE-K60)