Rohde & Schwarz RTP Series - Page 100

Instrument setup
R&S
®
RTP
100User Manual 1337.9952.02 ─ 12
Show grid
If selected, a grid is displayed in the diagram area. A grid helps you associate a spe-
cific data point to its exact value on the x- or y-axis.
Remote command:
DISPlay:DIAGram:GRID on page 1162
Show labels
If selected, labels mark values on the x- and y-axes in specified intervals in the dia-
gram.
Remote command:
DISPlay:DIAGram:LABels on page 1162
Show fine grid scale
If selected, the crosshair is displayed as a ruler with scale markers. If disabled, the
crosshair is shown as dashed lines.
Remote command:
DISPlay:DIAGram:FINegrid on page 1162
Appearance settings