Network operation and remote control
R&S
®
RTP
1095User Manual 1337.9952.02 ─ 12
Using a DNS server to determine the IP address
If a DNS server is configured on the R&S RTP, the server can determine the current IP
address for the connection using the permanent computer name.
1. Obtain the name of your DNS domain and the IP addresses of the DNS and WINS
servers on your network.
2. Open the "Menu" > "Settings" dialog.
3. Select the "System" tab.
4. Tap "Network".
5. Select "Ethernet".
6. On the "Networking" tab, select "Internet Protocol Version 4 (TCP/IPv4)", and then
select "Properties".
Setting up a network (LAN) connection
To Next Page
Loading...
