Rohde & Schwarz RTP Series - Page 1116

Network operation and remote control
R&S
®
RTP
1116User Manual 1337.9952.02 ─ 12
Bit No. Meaning
6
MEAS7
7
MEAS8
STATus:QUEStionable:LAMP register
The LAMP (Low AMPlitude) bit is set if the magnitude of the signal is too low to get
reliable measurement results.
Table 21-10: Bits in the STATus:QUEStionable:LAMP register
Bit No. Meaning
0
MEAS1
1
MEAS2
2
MEAS3
3
MEAS4
4
MEAS5
5
MEAS6
6
MEAS7
7
MEAS8
STATus:QUEStionable:MASK register
This register contains information about the violation of masks. This bit is set if the
assigned mask is violated.
Table 21-11: Bits in the STATus:QUEStionable:MASK register
Bit No. Meaning
0
MASK1
1
MASK2
2
MASK3
3
MASK4
4
MASK5
5
MASK6
6
MASK7
7
MASK8
STATus:QUEStionable:ZVCO register
This register contains all information about overload of the R&S RT-ZVC input chan-
nels. The bit is set if the assigned channel is overloaded.
Remote control