Rohde & Schwarz RTP Series - Page 128

Instrument setup
R&S
®
RTP
128User Manual 1337.9952.02 ─ 12
Remote command:
MMEMory:AUTonaming:TEXT on page 1184
Date
If enabled, inserts the current date.
Remote command:
MMEMory:AUTonaming:DATE on page 1183
Index
If enabled, inserts an index.
Remote command:
MMEMory:AUTonaming:INDex on page 1183
Time
If enabled, inserts the current time.
Remote command:
MMEMory:AUTonaming:TIME on page 1183
Default path for all file operations
Defines the default path displayed in the file selection dialog box for loading and stor-
ing operations. If a USB flash drive is connected, the path is set automatically to the
drive letter of the USB flash drive.
To switch the directory quickly, double-tap the input field. Use the symbols on the left of
the file explorer box to change the directory.
Remote command:
MMEMory:AUTonaming:DEFaultpath on page 1184
Reset
Resets the default file path to the factory default.
Remote command:
MMEMory:AUTonaming:RESPath on page 1184
MMEMory:AUTonaming:RESall on page 1184
4.8.1.2 Defining default file paths and names
When a save or load operation is performed, a default file name and path is provided.
You can configure which path is used and how the file name is generated. In the file
selection dialog box, you can change the folder and name as desired.
To define the default file path
1. Tap "Menu" > "Settings".
2. Select the "Save /Recall" tab.
3. Select the "Autonaming" tab.
4. Double-tap the "Default path for all file operations" field.
Save / recall