Rohde & Schwarz RTP Series - Page 1292

Remote control commands
R&S
®
RTP
1292User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..3
Parameters:
<EBTBScrambleMd> SCRM | NSCR
SCRM: scrambled
NSCR: unscrambled
*RST: NSCR
Usage: Asynchronous command
22.9.13.6
128b/132b
TRIGger<m>:SERPattern:I32B:APATtern....................................................................... 1292
TRIGger<m>:SERPattern:I32B:PATTern.........................................................................1292
TRIGger<m>:SERPattern:I32B:SKAFter.........................................................................1292
TRIGger<m>:SERPattern:I32B:SSTP............................................................................ 1293
TRIGger<m>:SERPattern:I32B:SSTR............................................................................ 1293
TRIGger<m>:SERPattern:I32B:SYMType.......................................................................1293
TRIGger<m>:SERPattern:I32B:APATtern <Alignment>
Sets the alignment pattern.
Suffix:
<m>
.
1..3
Parameters:
<Alignment>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I32B:PATTern <Pattern>
Defines the control block or data block pattern in binary or hex format.
Suffix:
<m>
.
1..3
Parameters:
<Pattern>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I32B:SKAFter <SkipAfter>
Sets the skip bytes symbols send after a skip end symbol .
Suffix:
<m>
.
1..3
Trigger