Rohde & Schwarz RTP Series - Page 1293

Remote control commands
R&S
®
RTP
1293User Manual 1337.9952.02 ─ 12
Parameters:
<SkipAfter> Range: 1 to 32
Increment: 1
*RST: 3
Usage: Asynchronous command
TRIGger<m>:SERPattern:I32B:SSTP <SkipStop>
Sets the skip end symbol.
Suffix:
<m>
.
1..3
Parameters:
<SkipStop>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I32B:SSTR <SkipStart>
Sets the start skip value.
Suffix:
<m>
.
1..3
Parameters:
<SkipStart>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I32B:SYMType <SymbolType>
Selects the type of pattern, control block or the data block.
Suffix:
<m>
.
1..3
Parameters:
<SymbolType> CTL | DAT
*RST: DAT
Usage: Asynchronous command
22.9.13.7 128b/130b
TRIGger<m>:SERPattern:I30B:APATtern....................................................................... 1294
TRIGger<m>:SERPattern:I30B:PATTern.........................................................................1294
TRIGger<m>:SERPattern:I30B:SKAFter.........................................................................1294
TRIGger<m>:SERPattern:I30B:SSTP............................................................................ 1294
TRIGger<m>:SERPattern:I30B:SSTR............................................................................ 1294
TRIGger<m>:SERPattern:I30B:SYMType.......................................................................1295
Trigger