Rohde & Schwarz RTP Series - Page 1294

Remote control commands
R&S
®
RTP
1294User Manual 1337.9952.02 ─ 12
TRIGger<m>:SERPattern:I30B:APATtern <Alignment>
Sets the alignment pattern.
Suffix:
<m>
.
1..3
Parameters:
<Alignment>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I30B:PATTern <Pattern>
Defines the OS or data block pattern in binary or hex format.
Suffix:
<m>
.
1..3
Parameters:
<Pattern>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I30B:SKAFter <SkipAfter>
Sets the skip bytes symbols send after a skip end symbol .
Suffix:
<m>
.
1..3
Parameters:
<SkipAfter> Range: 1 to 32
Increment: 1
*RST: 3
Usage: Asynchronous command
TRIGger<m>:SERPattern:I30B:SSTP <SkipStop>
Sets the skip end symbol.
Suffix:
<m>
.
1..3
Parameters:
<SkipStop>
Usage: Asynchronous command
TRIGger<m>:SERPattern:I30B:SSTR <SkipStart>
Sets the start skip value.
Trigger