Rohde & Schwarz RTP Series - Page 1479

Remote control commands
R&S
®
RTP
1479User Manual 1337.9952.02 ─ 12
MTESt:EYEMask:TBSYmmetric <MaskTestName>,<TopBtomSymetrie>
MTESt:EYEMask:TBSYmmetric? <MaskTestName>
Sets bottom and top offsets to the same value so that the outer regions are symmetric
to the eye shape.
Parameters:
<TopBtomSymetrie> ON | OFF
*RST: ON
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
MTESt:EYEMask:TBWidth <MaskTestName>,<RectangleLength>
MTESt:EYEMask:TBWidth? <MaskTestName>
Sets the time width of the outer regions, symmetric to the eye shape center.
Parameters:
<RectangleLength> Range: 0 to 100
Increment: 0.01
*RST: 0.5
Default unit: s
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
MTESt:EYEMask:HPOSition <MaskTestName>,<PatOffsetX>
MTESt:EYEMask:HPOSition? <MaskTestName>
Sets the horizontal (time) value of the eye shape enter and thus defines the horizontal
position of the eye shape on the display.
Parameters:
<PatOffsetX> Range: -100 to 100
Increment: 0.01
*RST: 0
Default unit: s
Parameters for setting and query:
<MaskTestName> String with the name of the mask test
Usage: Asynchronous command
MTESt:EYEMask:VPOSition <MaskTestName>,<PatOffsetY>
MTESt:EYEMask:VPOSition? <MaskTestName>
Sets the vertical (voltage) value of the eye shape enter and thus defines the vertical
position of the eye shape on the display.
Mask testing