Rohde & Schwarz RTP Series - Page 1503

Remote control commands
R&S
®
RTP
1503User Manual 1337.9952.02 ─ 12
Parameters for setting and query:
<SearchName> String with the name of the search
Usage: Asynchronous command
SEARch:TRIGger:PATTern:TIMeout:MODE <SearchName>,<TimeoutMode>
SEARch:TRIGger:PATTern:TIMeout:MODE? <SearchName>
Defines the condition for the timeout.
Parameters:
<TimeoutMode> HIGH | LOW | EITHer
EITHer
High or low, the pattern remains unchanged for the given time.
*RST: HIGH
Parameters for setting and query:
<SearchName> String with the name of the search
Usage: Asynchronous command
SEARch:TRIGger:PATTern:TIMeout[:TIME] <SearchName>,<Time>
SEARch:TRIGger:PATTern:TIMeout[:TIME]? <SearchName>
Defines how long the result of the pattern condition must keep the given state.
Parameters:
<Time> Range: 100E-12 to 864
Increment: 100E-9
*RST: 100E-9
Default unit: s
Parameters for setting and query:
<SearchName> String with the name of the search
Usage: Asynchronous command
SEARch:TRIGger:PATTern:WIDTh:RANGe <SearchName>,<WidthRangeMode>
SEARch:TRIGger:PATTern:WIDTh:RANGe? <SearchName>
Defines the time range of a pulse width for keeping up the true result of the pattern
condition. The width and delta are specified using SEARch:TRIGger:PATTern:
WIDTh[:WIDTh] and SEARch:TRIGger:PATTern:WIDTh:DELTa.
Parameters:
<WidthRangeMode> WITHin | OUTSide | SHORter | LONGer
WITHin | OUTSide
Triggers on pulses inside or outside a given range. The range is
defined by the width ±delta.
SHORter | LONGer
Triggers on pulses shorter or longer than the given width.
Search