Rohde & Schwarz RTP Series - Page 1514

Remote control commands
R&S
®
RTP
1514User Manual 1337.9952.02 ─ 12
Usage: Asynchronous command
SEARch:RESDiagram:VERT:MODE <SearchName>,<Mode>
SEARch:RESDiagram:VERT:MODE? <SearchName>
Defines whether absolute or relative values are used to specify the y-axis values.
Parameters:
<Mode> ABS | REL
*RST: ABS
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:RESDiagram:VERT:RELative:POSition <SearchName>,<RelPosi>
SEARch:RESDiagram:VERT:RELative:POSition? <SearchName>
Defines the y-value of the centerpoint of the zoom area.
Parameters:
<RelPosi> Range: 0 to 100
Increment: 0.1
*RST: 100
Default unit: %
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:RESDiagram:VERT:RELative:SPAN <SearchName>,<RelativeSpan>
SEARch:RESDiagram:VERT:RELative:SPAN? <SearchName>
Defines the height of the zoom area.
Parameters:
<RelativeSpan> Range: 1E-15 to 100
Increment: 0.1
*RST: 1
Default unit: %
Parameters for setting and query:
<SearchName> Search definition
Usage: Asynchronous command
SEARch:RESult:LIMit <SearchName>,<ResultListLimit>
SEARch:RESult:LIMit? <SearchName>
Defines the maximum number of entries in the search result table.
Search