Rohde & Schwarz RTP Series - Page 1550

Remote control commands
R&S
®
RTP
1550User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<DataFormat> HEX | OCT | BIN | ASCII | ASCii | SIGN | USIG
ASCII = ASCii
USIG = unsigned
*RST: HEX
BUS<m>:NEWList <FileName>
Loads a label list file.
Suffix:
<m>
.
1..4
Selects the serial bus.
Setting parameters:
<FileName> String parameter with path and file name.
Example:
BUS1:NEWList 'C:\Protocols\CAN.csv'
BUS1:SYMBols ON
Usage: Setting only
BUS<m>:SYMBols <UseTranslation>
Activates the lable list to be used for decoding.
Suffix:
<m>
.
1..4
Selects the serial bus.
Parameters:
<UseTranslation> ON | OFF
*RST: OFF
Usage: Asynchronous command
BUS<m>:ZCOupling <ZoomCoupling>
If enabled, the protocol decode zoom and result table are synchronized.
Suffix:
<m>
.
1..4
Parameters:
<ZoomCoupling> ON | OFF
*RST: OFF
Protocols