Rohde & Schwarz RTP Series - Page 1598

Remote control commands
R&S
®
RTP
1598User Manual 1337.9952.02 ─ 12
BUS<m>:SPI:FRAMe<n>:WORD<o>:MOSI?
Returns the data value of the specified word on the MOSI line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<MOSIValue> To set the value format, use FORMat:BPATtern.
The values below – range, increment and reset – are decimal
values.
Range: 0 to 4294967295
*RST: 0
Usage: Query only
BUS<m>:SPI:FRAMe<n>:WORD<o>:FMOSi?
Returns the formatted value of the specified word on the MOSI line.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
<o> *
Selects the word number.
Return values:
<FormattedMOSIVal>
Usage: Query only
22.17.4.4 SPI search settings
In search setup commands, you must specify the <SearchName> parameter. It is a
string parameter that contains the search definition name. All commands are similar to
SPI trigger commands.
SEARch:TRIGger:SPI:MODE........................................................................................1599
SEARch:TRIGger:SPI:FCONdition.................................................................................1599
SEARch:TRIGger:SPI:MISopattern................................................................................1600
SEARch:TRIGger:SPI:MOSipattern............................................................................... 1600
SEARch:TRIGger:SPI:DPOPerator................................................................................1600
Protocols