Remote control commands
R&S
®
RTP
1930User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:MPHY:SSIC:IMAX <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMAX
<SearchName>,<IndexMax>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMAX? <SearchName>
Sets the end value of an index range if SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:
FLD<n>:IOPerator is set to INRange or RANGe.
Suffix:
<m>
.
*
Specifies the frame number.
<n> *
Specifies the field number within the frame.
Parameters:
<IndexMax> Specifies the end value for the index range within the field.
The index range, increment and *RST values depend on the
field type.
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:MPHY:SSIC:IMIN <SearchName>,<Frame>, <Field>, <Data>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMIN
<SearchName>,<IndexMin>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IMIN? <SearchName>
Specifies the index at which the data is to be searched, or sets the start value of an
index range in which the data is to be searched.
Suffix:
<m>
.
*
Specifies the field number within the frame.
<n> *
Parameters:
<IndexMin> Specifies the index value or the start value of an index range
within the field.
The index range, increment and *RST values depend on the
field type.
Parameters for setting and query:
<SearchName> String with the name of the search.
SEARch:TRIGger:MPHY:SSIC:IOPerator <SearchName>,<Frame>, <Field>,
<Operator>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IOPerator
<SearchName>,<IndexOperator>
SEARch:TRIGger:MPHY:SSIC:FRAMe<m>:FLD<n>:IOPerator? <SearchName>
Sets the operator for the index for searching in the selected field of the selected frame.
Protocols
To Next Page
Loading...
