Rohde & Schwarz RTP Series - Page 1975

Remote control commands
R&S
®
RTP
1975User Manual 1337.9952.02 ─ 12
BUS<m>:EBTB:EBTRate?
Queries the estimated bitrate value.
Suffix:
<m>
.
1..4
Return values:
<EstimatedBitrate> Range: 100 to 100E+9
Increment: 10
*RST: 1.25E+9
Default unit: bps
Usage: Query only
BUS<m>:EBTB:DIFFerential:SOURce <SrcDiff>
Selects the source of the provided differential signal, if BUS<m>:EBTB:TYPE
DIFFerential is set.
Suffix:
<m>
.
1..4
Parameters:
<SrcDiff> C1W1 | C2W1 | C3W1 | C4W1 | M1 | M2 | M3 | M4 | M5 | M6 |
M7 | M8 | R1 | R2 | R3 | R4
*RST: C1W1
Usage: Asynchronous command
BUS<m>:EBTB:DIFFerential:THRHigh <ThresholdHigh>
Sets the high threshold of the signal, if BUS<m>:EBTB:TYPE DIFFerential.
Suffix:
<m>
.
1..4
Parameters:
<ThresholdHigh> Range: -10 to 10
Increment: 1E-3
*RST: 0.15
Default unit: V
BUS<m>:EBTB:DIFFerential:THRLow <ThresholdLow>
Sets the low threshold of the signal, if BUS<m>:EBTB:TYPE DIFFerential.
Suffix:
<m>
.
1..4
Protocols