Rohde & Schwarz RTP Series - Page 1984

Remote control commands
R&S
®
RTP
1984User Manual 1337.9952.02 ─ 12
Suffix:
<m>
.
1..4
<n> *
Return values:
<KDCode>
Usage: Query only
BUS<m>:EBTB:SYMBol<n>:TENBit?
Returns the 10-bit symbol.
Suffix:
<m>
.
1..4
<n> *
Return values:
<TenBit>
Usage: Query only
22.17.17.4 Search settings
SEARch:TRIGger:EBTB:DISParityerr.............................................................................1984
SEARch:TRIGger:EBTB:DX..........................................................................................1985
SEARch:TRIGger:EBTB:DY..........................................................................................1985
SEARch:TRIGger:EBTB:EBPA......................................................................................1985
SEARch:TRIGger:EBTB:GLITcherror............................................................................. 1985
SEARch:TRIGger:EBTB:STYPe.................................................................................... 1986
SEARch:TRIGger:EBTB:SYME..................................................................................... 1986
SEARch:TRIGger:EBTB:SYMType................................................................................ 1986
SEARch:TRIGger:EBTB:TBPA...................................................................................... 1986
SEARch:TRIGger:EBTB:TYPE......................................................................................1987
SEARch:TRIGger:EBTB:UNK........................................................................................1987
SEARch:TRIGger:EBTB:DISParityerr <SearchName>,<DispError>
SEARch:TRIGger:EBTB:DISParityerr? <SearchName>
Defines, if a search for any disparity error is activated or not.
Parameters:
<DispError> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName>
Protocols