Rohde & Schwarz RTP Series - Page 1991

Remote control commands
R&S
®
RTP
1991User Manual 1337.9952.02 ─ 12
BUS<m>:MDIO:CLOCk:THReshold:LOW <ThresClkLow>
Defines the lower threshold level for the clock signal.
Suffix:
<m>
.
1..4
Parameters:
<ThresClkLow> Range: -5 to 5
Increment: 0.1
*RST: 0.8
Default unit: V
BUS<m>:MDIO:DATA:THReshold:HIGH
<ThresDatHigh>
Defines the upper threshold level for the data signal.
Suffix:
<m>
.
1..4
Parameters:
<ThresDatHigh> Range: -5 to 5
Increment: 0.1
*RST: 2
Default unit: V
BUS<m>:MDIO:DATA:THReshold:LOW <ThresDatLow>
Defines the lower threshold level for the data signal.
Suffix:
<m>
.
1..4
Parameters:
<ThresDatLow> Range: -5 to 5
Increment: 0.1
*RST: 0.8
Default unit: V
BUS<m>:MDIO:PRESet <Preset>
Selects the default threshold settings according to the Ethernet standard: 2.0 V and
0.8 V.
Suffix:
<m>
.
1..4
Parameters:
<Preset> DEFault | MANual
*RST: DEFault
Protocols