Rohde & Schwarz RTP Series - Page 2219

Remote control commands
R&S
®
RTP
2219User Manual 1337.9952.02 ─ 12
Parameters:
<DataFormat> HEX | OCT | BIN | ASCII | ASCii | SIGN | USIG
*RST: HEX
BUS<m>:PARallel:DATA:HEADer?
Returns the header data of the indicated bus.
For a detailed description, see DIGital<m>:DATA:HEADer?.
Suffix:
<m>
.
1..4
Selects the parallel bus.
Usage: Query only
Firmware/software: V 2.40
BUS<m>:PARallel:DATA[:VALues]?
Returns the data of the indicated parallel bus.
Requirements:
●
BUS<m>:PARallel:STATe is set to ON.
●
BUS<m>:PARallel:DISPlay:SHBU is set to ON.
●
Number format is set with BUS<m>:PARallel:DATA:FORMat.
Suffix:
<m>
.
1..4
Selects the parallel bus.
Return values:
<Data> List of values according to the format setting.
Example:
BUS:PAR:STAT ON
BUS:PAR:DISP:SHBU ON
BUS:PAR:DISP:BTYP COMB
BUS:PAR:DATA:FORMat HEX
BUS:PAR:DATA:VAL?
Usage: Query only
Mixed signal option (MSO, R&S RTP-B1)