Rohde & Schwarz RTP Series - Page 2229

Remote control commands
R&S
®
RTP
2229User Manual 1337.9952.02 ─ 12
22.19.1.4 Sweep
WGENerator<m>:SWEep:FSTart...................................................................................2229
WGENerator<m>:SWEep:TIME.....................................................................................2229
WGENerator<m>:SWEep[:FEND]..................................................................................2229
WGENerator<m>:SWEep:FSTart <StartFrequency>
Sets the start frequency of the sweep range.
Suffix:
<m>
.
1..2
Parameters:
<StartFrequency> Range: 1E-3 to 100E+6
Increment: 1
*RST: 1000
Default unit: Hz
WGENerator<m>:SWEep:TIME <Time>
Sets the duration of the sweep.
Suffix:
<m>
.
1..2
Parameters:
<Time> Range: 1E-3 to 500
Increment: 1
*RST: 1E-3
Default unit: s
WGENerator<m>:SWEep[:FEND] <StopFrequency>
Sets the stop frequency of the sweep range.
Suffix:
<m>
.
1..2
Parameters:
<StopFrequency> Range: 1E-3 to 100E+6
Increment: 1
*RST: 1E+6
Default unit: Hz
22.19.1.5 ARB
WGENerator<m>:ARBGen:COPY................................................................................. 2230
WGENerator<m>:ARBGen:MULTichannel:IMPort............................................................2230
WGENerator<m>:ARBGen:MULTichannel:NAME............................................................2230
WGENerator<m>:ARBGen:MULTichannel:OPEN............................................................2231
Waveform generator (option R&S
RTP-B6)