Rohde & Schwarz RTP Series - Page 2275

Remote control commands
R&S
®
RTP
2275User Manual 1337.9952.02 ─ 12
Return values:
<FreqValue> Range: 0 to 1E+15
Increment: 0
*RST: 0
Default unit: Hz
Usage: Query only
Measurements
ADVJitter<m>:DCOMposition:CLEBasicmeas................................................................. 2275
ADVJitter<m>:DCOMposition:SELBasicmeas................................................................. 2275
ADVJitter<m>:DCOMposition:CLEJitcomp......................................................................2275
ADVJitter<m>:DCOMposition:SELJitcomp......................................................................2275
ADVJitter<m>:DCOMposition:CLENoisecomp.................................................................2276
ADVJitter<m>:DCOMposition:SELNoisecomp.................................................................2276
ADVJitter<m>:RESult:TRANsitions................................................................................ 2276
ADVJitter<m>:RESult:LEVels........................................................................................ 2276
ADVJitter<m>:DCOMposition:CLEBasicmeas
Clears all selected basic jitter components.
Suffix:
<m>
.
1..2
Usage: Event
Asynchronous command
ADVJitter<m>:DCOMposition:SELBasicmeas
Selects all basic jitter components.
Suffix:
<m>
.
1..2
Usage: Event
Asynchronous command
ADVJitter<m>:DCOMposition:CLEJitcomp
Clears all selected jitter components.
Suffix:
<m>
.
1..2
Usage: Event
Asynchronous command
ADVJitter<m>:DCOMposition:SELJitcomp
Selects all jitter components.
Jitter analysis and clock data recovery