Rohde & Schwarz RTP Series - Page 306

Waveform analysis
R&S
®
RTP
306User Manual 1337.9952.02 ─ 12
See also:
●
Vertical scaling mode (Manual/Auto)
●
Vertical Offset
●
Vertical Scale
Unwrap
If enabled, phase shifts due to a limitation of the value range are eliminated.
Remote command:
CALCulate:MATH<m>:FFT:PHASe:UNWRap on page 1454
Unit
Defines the scaling unit for phase display.
●
Radians
●
Degrees
Remote command:
CALCulate:MATH<m>:FFT:PHASe:SCALe on page 1453
Suppression
Enables noise suppression. Phase calculation is restricted to frequencies with a mini-
mum magnitude, the threshold value.
Remote command:
CALCulate:MATH<m>:FFT:PHASe:SUPPression on page 1454
Mathematics