Waveform analysis
R&S
®
RTP
311User Manual 1337.9952.02 ─ 12
Show history / Export history
Enables the history mode and allows you to save history waveforms to file.
The history display is enabled automatically when you press the [History] button. It is
disabled when you close the quick-access "History" dialog box.
For details on data export, see Chapter 12.2.2.2, "Waveform history settings",
on page 491.
Remote command:
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe] on page 1341
Player
The player can be used to control the playback of the history waveforms.
Sets the oldest acquisition in the sample memory as "Start acquisi-
tion" and "Current acquisition".
Starts and stops the replay of the history waveforms from "Start
acquisition" to "Stop acquisition".
Sets the newest acquisition in the sample memory as "Stop acquisi-
tion" and "Current acquisition". This acquisition always has the index
"0".
All acquisitions that are saved in the memory are in the viewer.
History
To Next Page
Loading...
