Rohde & Schwarz RTP Series - Page 352

Measurements
R&S
®
RTP
352User Manual 1337.9952.02 ─ 12
The R&S RTP provides various voltage, time, area and counting measurements in the
category "Amp/Time". Some measurements require reference levels to be set accord-
ing to the measurement purpose.
Reference levels are explained in Chapter 8.2.4, "Reference levels", on page 342.
● Amplitude measurements..................................................................................... 352
● Time measurements............................................................................................. 354
● Area measurements..............................................................................................356
● Counting................................................................................................................356
● Arithmetic.............................................................................................................. 357
Amplitude measurements
Access: [Meas] > "Meas Group" tab > "Amp/Time" category
Table 8-1: Amplitude measurements
Meas. type Symbol Description/Result
High X
High
High signal level
Low X
Low
Low signal level
Automatic measurements