Mask testing
R&S
®
RTP
432User Manual 1337.9952.02 ─ 12
A waveform mask is created from an existing waveform. The waveform builds the
upper and lower limit line of the mask, and the limits are moved and stretched. The
result is a tolerance tube around the waveform that is used as mask.
During mask testing using a waveform mask, the record length is limited to 1 MSam-
ple.
The source for a waveform mask is a reference waveform. The reference waveform
can be defined before mask definition, or loaded from a file, or it is created from the
waveform to be tested.
Figure 10-1: Waveform mask
Mask test settings
To Next Page
Loading...
