Getting started
R&S
®
RTP
46User Manual 1337.9952.02 ─ 12
Connecting a keyboard
The keyboard is detected automatically when it is connected. The default input lan-
guage is English – US.
To configure the keyboard properties:
1. Tap the "Find" icon (magnifier) on the Windows taskbar.
2. Type keybord.
3. Select "Edit language and keyboard options".
Connecting a mouse
The mouse is detected automatically when it is connected. To configure the mouse
properties:
1. Tap the "Find" icon (magnifier) on the Windows taskbar.
2. Type mouse.
3. Select "Mouse settings".
3.1.8.2 Connecting an external monitor
You can connect an external monitor or projector to the R&S RTP. The following con-
nectors are available:
●
"DVI-D" on page 51
●
"DisplayPort" on page 51
Before connecting an external monitor, ensure that the monitor and the R&S RTP are
connected to a ground contact. Otherwise the instrument can be damaged.
After connecting an additional monitor or projector to the instrument, configure it for
usage. The relevant settings are Windows settings but you can configure the displays
directly in the instrument setup.
1. Check the input type of the monitor or projector. Make sure to select the correct
cable. To use a VGA monitor, you need an active DVI-D to VGA adapter.
2. Open "Menu" > "Settings" > "Display".
3. Select the "Monitors" tab.
4. Select how to display the screen.
5. To access Windows display settings, tap "Additional settings".
The touchscreen of the R&S RTP has a screen resolution of 1280 x 800 pixel. Many
external monitors have a higher screen resolution. If the screen resolution of the moni-
tor is set higher than the instrument's resolution, the application window uses a 1280 x
800 area of the monitor display. For full screen display, adjust the monitor's screen res-
olution using "Additional display settings".
Preparing for use
To Next Page
Loading...
