EasyManua.ls Logo

Rohde & Schwarz RTP Series - Page 59

Rohde & Schwarz RTP Series
2403 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting started
R&S
®
RTP
59User Manual 1337.9952.02 ─ 12
App Cockpit
Opens the "App Cockpit" dialog box, where you can start an application or analysis
function directly, without knowing its position in the menu or toolbar.
[Zoom]
Displays a zoom diagram for the active diagram. The key is illuminated if at least one
zoom is active. If you press the key while the zoom function is on, the "Zoom" dialog
box opens, where you can configure several zoom areas for detailed signal observa-
tion.
[Protocol]
Opens the "Protocol" dialog box which contains the configuration of serial buses and
the settings for decoding the signals.
The key lights up if the decoding of a serial bus is active. You can switch off the deco-
ded bus using the [Signal Off] key.
[Search]
Opens and closes the "Search" dialog box, where you can:
Configure trigger events to be searched for
Limit the search by gating
Configure the presentation of search results
[Mask]
Opens and closes the "Masks" dialog box. Masks are used for error detection and
compliance tests of digital signals.
You can:
Configure masks and masks segments
Define mask test parameters
Configure actions triggered by mask violation
Configure the mask display
[History]
The sample memory contains several stored acquisitions before the current one, which
is shown in the display. Press the key to open the quick access "History" dialog box,
where you can view the stored acquisitions and use them for further analysis. Press
the key again to open the main "History" dialog box with more settings and information.
The key is illuminated as long as a history acquisition or replay is displayed.
[FFT]
Opens and closes the FFT setup.
The key lights up if an FFT is active. You can switch off the FFT math waveform using
the [Signal Off] key.
3.2.3.7 Navigation controls
The rotary knob and the navigation keys provide an alternative way to navigate in dia-
log boxes and to enter numeric data.
See also: Chapter 3.3.8, "Using dialog boxes", on page 81
Instrument tour

Table of Contents

Other manuals for Rohde & Schwarz RTP Series

Related product manuals