Protocol analysis
R&S
®
RTP
649User Manual 1337.9952.02 ─ 12
●
Destination address
●
Source address
●
Length/Type
●
Frame check
●
Data
●
Index
The frame contains addresses of the devices and MAC control information that define
how to go about transmitting and receiving frames.
IDLE ← Type
Triggers on an idle frame. The frame is used for clock synchronization.
Error ← Type
Triggers on the specified error frame.
Ethernet 100BASE-T1 (option R&S RTP-57)
To Next Page
Loading...
