Rohde & Schwarz RTP Series - Page 669

Protocol analysis
R&S
®
RTP
669User Manual 1337.9952.02 ─ 12
"Index Max"
The second index pattern is required to specify a range with condi-
tions "In range".
Remote command:
TRIGger<m>:TBTO:DATA:ICONdition on page 1794
TRIGger<m>:TBTO:DATA:IMIN on page 1794
TRIGger<m>:TBTO:DATA:IMAX on page 1794
Errors
Sets the type of error events to be triggered on.
RS-FEC error ← Errors
Triggers, if more than 22 RS-FEC errors are detected.
Remote command:
TRIGger<m>:TBTO:ERRor:FEC on page 1795
CRC error ← Errors
Triggers on a frame that has a mismatch of the cyclic redundancy check (CRC) value
between the transmitting and receiving device.
Remote command:
TRIGger<m>:TBTO:ERRor:CRC on page 1795
Out of range error ← Errors
Triggers if values are out of range. This can be, for example a preamble error, or inva-
lid symbols in control blocks.
Remote command:
TRIGger<m>:TBTO:ERRor:OOR on page 1795
Zero terrnary symbol ← Errors
Triggers, if a zero ternary symbol pair (0-0) is detected.
Remote command:
TRIGger<m>:TBTO:ERRor:ZERO on page 1795
Ethernet 1000BASE-T1 (option R&S
RTP-K58)