Getting started
R&S
®
RTP
67User Manual 1337.9952.02 ─ 12
Figure 3-8: Control elements on the touchscreen
1 = Toolbar
2 = Tab in a dialog box
3 = Dialog box
4 = Result table (docked)
5 = Signal bar
6 = Menu
Not shown = Input box
Toolbar (1)
The icons on the toolbar provide quick and easy access to the most important function-
ality. For a detailed description, refer to Chapter 3.3.6, "Toolbar", on page 73.
If you adjust the settings of an analyzing function, e.g., cursor measurement, the tool-
bar assist is shown instead of the icons. The toolbar assist provides the most important
settings of the current action. If you need more settings, "Advanced Setup" opens the
corresponding dialog box.
Dialog box (2, 3)
The tabs of the dialog boxes contain all task-oriented settings and operations, and
black buttons for calling related tabs. The usage of dialog boxes is described in Chap-
ter 3.3.8, "Using dialog boxes", on page 81.
Operating the instrument
To Next Page
Loading...
