Protocol analysis
R&S
®
RTP
769User Manual 1337.9952.02 ─ 12
Frame type
Selects the frame type for the custom bus filtering.
You can define individual checking parameters for the fields listed in the "Trigger type
dependent settings".
To specify these parameters, select a field from this list and define the data and/or
index operators and values, or the bit state.
Remote command:
BUS<m>:CMSB:FILTer:FRAMe<n>:ENABle on page 1954
Custom: Manchester / NRZ (option R&S
RTP-K50)M
To Next Page
Loading...
