Rohde & Schwarz RTP044 - Page 1050

Jitter analysis and clock data recovery
R&S
®
RTP
1050User Manual 1337.9952.02 ─ 12
Synthetic eye
Enables a synthetic eye plot out of the synthesized data.
Remote command:
ADVJitter<m>:RESult:SYNTheticeye on page 2279
Add periodic components to DD synthetic eye
Adds horizontal/vertical periodic components to the data-dependent synthetic eye.
Remote command:
ADVJitter<m>:RESult:PHORizontal on page 2279
ADVJitter<m>:RESult:PVERtical on page 2279
18.2.5.7 Diagram settings
In the diagram settings dialog you can set a separate scale for the basic, jitter and
noise parameters.
Settings for histogram and track
Defines the settings for the histogram and track diagrams.
Interleaved ← Settings for histogram and track
Displays interleaved histogram values.
Remote command:
ADVJitter<m>:DCOMposition:JINTerleaved on page 2284
Max. numb of bins ← Settings for histogram and track
Sets the number of bins, the number of data intervals, of the histogram.
Advanced jitter and noise (option R&S
RTP- K133/K134)