Rohde & Schwarz RTP044 - Page 1350

Remote control commands
R&S
®
RTP
1350User Manual 1337.9952.02 ─ 12
Usage: Event
Asynchronous command
CURSor<m>:FUNCtion <Type>
Defines the type of the indicated cursor set.
Suffix:
<m>
.
1..4
Selects the cursor set.
Parameters:
<Type> HORizontal | VERTical | PAIRed
HORizontal
A pair of horizontal cursor lines.
VERTical
A pair of vertical cursor lines.
PAIRed
Both vertical and horizontal cursor line pairs.
*RST: PAIRed
Usage: Asynchronous command
CURSor<m>:SOURce <Source>
Defines the source of the cursor measurement.
Suffix:
<m>
.
1..4
Selects the cursor set.
Cursor measurements